[BACK]Return to imach.c CVS log [TXT] [DIR] Up to [Local Repository] / imach / src

Diff for /imach/src/imach.c between versions 1.256 and 1.259

version 1.256, 2017/03/27 05:50:23 version 1.259, 2017/04/04 13:01:16
Line 1 Line 1
 /* $Id$  /* $Id$
   $State$    $State$
   $Log$    $Log$
     Revision 1.259  2017/04/04 13:01:16  brouard
     Summary: Some errors to warnings only if date of death is unknown but status is death we could set to pi3
   
     Revision 1.258  2017/04/03 10:17:47  brouard
     Summary: Version 0.99r12
   
     Some cleanings, conformed with updated documentation.
   
     Revision 1.257  2017/03/29 16:53:30  brouard
     Summary: Temp
   
   Revision 1.256  2017/03/27 05:50:23  brouard    Revision 1.256  2017/03/27 05:50:23  brouard
   Summary: Temporary    Summary: Temporary
   
Line 1174  int *TvarsQind; Line 1185  int *TvarsQind;
   
 #define MAXRESULTLINES 10  #define MAXRESULTLINES 10
 int nresult=0;  int nresult=0;
   int parameterline=0; /* # of the parameter (type) line */
 int TKresult[MAXRESULTLINES];  int TKresult[MAXRESULTLINES];
 int Tresult[MAXRESULTLINES][NCOVMAX];/* For dummy variable , value (output) */  int Tresult[MAXRESULTLINES][NCOVMAX];/* For dummy variable , value (output) */
 int Tinvresult[MAXRESULTLINES][NCOVMAX];/* For dummy variable , value (output) */  int Tinvresult[MAXRESULTLINES][NCOVMAX];/* For dummy variable , value (output) */
Line 4959  void  concatwav(int wav[], int **dh, int Line 4971  void  concatwav(int wav[], int **dh, int
       /* if(mi==0)  never been interviewed correctly before death */        /* if(mi==0)  never been interviewed correctly before death */
       /* Only death is a correct wave */        /* Only death is a correct wave */
       mw[mi][i]=m;        mw[mi][i]=m;
     }      } /* else not in a death state */
 #ifndef DISPATCHINGKNOWNDEATHAFTERLASTWAVE  #ifndef DISPATCHINGKNOWNDEATHAFTERLASTWAVE
     else if ((int) andc[i] != 9999) { /* Status is negative. A death occured after lastpass, we can't take it into account because of potential bias */      else if ((int) andc[i] != 9999) {  /* Date of death is known */
       /* m++; */  
       /* mi++; */  
       /* s[m][i]=nlstate+1;  /\* We are setting the status to the last of non live state *\/ */  
       /* mw[mi][i]=m; */  
       if ((int)anint[m][i]!= 9999) { /* date of last interview is known */        if ((int)anint[m][i]!= 9999) { /* date of last interview is known */
         if((andc[i]+moisdc[i]/12.) <=(anint[m][i]+mint[m][i]/12.)){ /* death occured before last wave and status should have been death instead of -1 */          if((andc[i]+moisdc[i]/12.) <=(anint[m][i]+mint[m][i]/12.)){ /* death occured before last wave and status should have been death instead of -1 */
           nbwarn++;            nbwarn++;
Line 4978  void  concatwav(int wav[], int **dh, int Line 4986  void  concatwav(int wav[], int **dh, int
         }else{ /* Death occured afer last wave potential bias */          }else{ /* Death occured afer last wave potential bias */
           nberr++;            nberr++;
           if(firstwo==0){            if(firstwo==0){
             printf("Error! Death for individual %ld line=%d occurred at %d/%d after last wave %d interviewed at %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood.\nOthers in log file only\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );              printf("Error! Death for individual %ld line=%d occurred at %d/%d after last wave %d interviewed at %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood. Please add a new fictive wave at the date of last vital status scan, with a dead status or alive but unknown state status (-1). See documentation\nOthers in log file only\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );
             firstwo=1;              firstwo=1;
           }            }
           fprintf(ficlog,"Error! Death for individual %ld line=%d occurred at %d/%d after last wave %d interviewed at %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood.\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );            fprintf(ficlog,"Error! Death for individual %ld line=%d occurred at %d/%d after last wave %d interviewed at %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood. Please add a new fictive wave at the date of last vital status scan, with a dead status or alive but unknown state status (-1). See documentation\n\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );
         }          }
       }else{ /* end date of interview is known */        }else{ /* if date of interview is unknown */
         /* death is known but not confirmed by death status at any wave */          /* death is known but not confirmed by death status at any wave */
         if(firstfour==0){          if(firstfour==0){
           printf("Error! Death for individual %ld line=%d  occurred %d/%d but not confirmed by any death status for any wave, including last wave %d at unknown date %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood.\nOthers in log file only\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );            printf("Error! Death for individual %ld line=%d  occurred %d/%d but not confirmed by any death status for any wave, including last wave %d at unknown date %d/%d. Potential bias if other individuals are still alive at this date but ignored. This case (%d)/wave (%d) is skipped, no contribution to likelihood.\nOthers in log file only\n",num[i],i,(int) moisdc[i], (int) andc[i], lastpass,(int)mint[m][i],(int)anint[m][i], i,m );
Line 6376  To be simple, these graphs help to under Line 6384  To be simple, these graphs help to under
 void printinghtml(char fileresu[], char title[], char datafile[], int firstpass, \  void printinghtml(char fileresu[], char title[], char datafile[], int firstpass, \
                   int lastpass, int stepm, int weightopt, char model[],\                    int lastpass, int stepm, int weightopt, char model[],\
                   int imx,int jmin, int jmax, double jmeanint,char rfileres[],\                    int imx,int jmin, int jmax, double jmeanint,char rfileres[],\
                   int popforecast, int prevfcast, int backcast, int estepm , \                    int popforecast, int mobilav, int prevfcast, int mobilavproj, int backcast, int estepm , \
                   double jprev1, double mprev1,double anprev1, double dateprev1, \                    double jprev1, double mprev1,double anprev1, double dateprev1, \
                   double jprev2, double mprev2,double anprev2, double dateprev2){                    double jprev2, double mprev2,double anprev2, double dateprev2){
   int jj1, k1, i1, cpt, k4, nres;    int jj1, k1, i1, cpt, k4, nres;
Line 6450  void printinghtml(char fileresu[], char Line 6458  void printinghtml(char fileresu[], char
        }         }
      }       }
      /* aij, bij */       /* aij, bij */
      fprintf(fichtm,"<br>- Logit model (yours is: 1+age+%s), for example: logit(pij)=log(pij/pii)= aij+ bij age + V1 age + etc. as a function of age: <a href=\"%s_%d-1-%d.svg\">%s_%d-1-%d.svg</a><br> \       fprintf(fichtm,"<br>- Logit model (yours is: logit(pij)=log(pij/pii)= aij+ bij age+%s) as a function of age: <a href=\"%s_%d-1-%d.svg\">%s_%d-1-%d.svg</a><br> \
 <img src=\"%s_%d-1-%d.svg\">",model,subdirf2(optionfilefiname,"PE_"),k1,nres,subdirf2(optionfilefiname,"PE_"),k1,nres,subdirf2(optionfilefiname,"PE_"),k1,nres);  <img src=\"%s_%d-1-%d.svg\">",model,subdirf2(optionfilefiname,"PE_"),k1,nres,subdirf2(optionfilefiname,"PE_"),k1,nres,subdirf2(optionfilefiname,"PE_"),k1,nres);
      /* Pij */       /* Pij */
      fprintf(fichtm,"<br>\n- P<sub>ij</sub> or conditional probabilities to be observed in state j being in state i, %d (stepm) months before: <a href=\"%s_%d-2-%d.svg\">%s_%d-2-%d.svg</a><br> \       fprintf(fichtm,"<br>\n- P<sub>ij</sub> or conditional probabilities to be observed in state j being in state i, %d (stepm) months before: <a href=\"%s_%d-2-%d.svg\">%s_%d-2-%d.svg</a><br> \
Line 6487  divided by h: <sub>h</sub>P<sub>ij</sub> Line 6495  divided by h: <sub>h</sub>P<sub>ij</sub>
      if(prevfcast==1){       if(prevfcast==1){
        /* Projection of prevalence up to period (stable) prevalence in each health state */         /* Projection of prevalence up to period (stable) prevalence in each health state */
        for(cpt=1; cpt<=nlstate;cpt++){         for(cpt=1; cpt<=nlstate;cpt++){
          fprintf(fichtm,"<br>\n- Projection of cross-sectional prevalence (estimated with cases observed from %.1f to %.1f) up to period (stable) prevalence in state %d. Or probability to be in state %d being in state (1 to %d) at different ages. <a href=\"%s_%d-%d-%d.svg\">%s_%d-%d-%d.svg</a><br> \           fprintf(fichtm,"<br>\n- Projection of cross-sectional prevalence (estimated with cases observed from %.1f to %.1f and mobil_average=%d) up to period (stable) prevalence in state %d. Or probability to be in state %d being in state (1 to %d) at different ages. <a href=\"%s_%d-%d-%d.svg\">%s_%d-%d-%d.svg</a><br> \
 <img src=\"%s_%d-%d-%d.svg\">", dateprev1, dateprev2, cpt, cpt, nlstate, subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres,subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres,subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres);  <img src=\"%s_%d-%d-%d.svg\">", dateprev1, dateprev2, mobilavproj, cpt, cpt, nlstate, subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres,subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres,subdirf2(optionfilefiname,"PROJ_"),cpt,k1,nres);
        }         }
      }       }
                     
Line 6576  See page 'Matrix of variance-covariance Line 6584  See page 'Matrix of variance-covariance
        }         }
      }       }
      for(cpt=1; cpt<=nlstate;cpt++) {       for(cpt=1; cpt<=nlstate;cpt++) {
        fprintf(fichtm,"\n<br>- Observed (cross-sectional) and period (incidence based) \         fprintf(fichtm,"\n<br>- Observed (cross-sectional with mov_average=%d) and period (incidence based) \
 prevalence (with 95%% confidence interval) in state (%d): <a href=\"%s_%d-%d-%d.svg\"> %s_%d-%d-%d.svg</a>\n <br>\  prevalence (with 95%% confidence interval) in state (%d): <a href=\"%s_%d-%d-%d.svg\"> %s_%d-%d-%d.svg</a>\n <br>\
 <img src=\"%s_%d-%d-%d.svg\">",cpt,subdirf2(optionfilefiname,"V_"),cpt,k1,nres,subdirf2(optionfilefiname,"V_"),cpt,k1,nres,subdirf2(optionfilefiname,"V_"),cpt,k1,nres);    <img src=\"%s_%d-%d-%d.svg\">",mobilav,cpt,subdirf2(optionfilefiname,"V_"),cpt,k1,nres,subdirf2(optionfilefiname,"V_"),cpt,k1,nres,subdirf2(optionfilefiname,"V_"),cpt,k1,nres);  
      }       }
      fprintf(fichtm,"\n<br>- Total life expectancy by age and \       fprintf(fichtm,"\n<br>- Total life expectancy by age and \
 health expectancies in states (1) and (2). If popbased=1 the smooth (due to the model) \  health expectancies in states (1) and (2). If popbased=1 the smooth (due to the model) \
Line 9100  int calandcheckages(int imx, int maxwav, Line 9108  int calandcheckages(int imx, int maxwav,
           s[m][i]=-1;            s[m][i]=-1;
       }        }
       if((int)moisdc[i]==99 && (int)andc[i]==9999 && s[m][i]>nlstate){        if((int)moisdc[i]==99 && (int)andc[i]==9999 && s[m][i]>nlstate){
         *nberr = *nberr + 1;          *nbwarn = *nbwarn + 1;
         if(firstone == 0){          if(firstone == 0){
           firstone=1;            firstone=1;
         printf("Error! Date of death (month %2d and year %4d) of individual %ld on line %d was unknown, you must set an arbitrary year of death or he/she is skipped and results can be biased (%d) because status is a death state %d at wave %d. Wave dropped.\nOther similar cases in log file\n",(int)moisdc[i],(int)andc[i],num[i],i, *nberr,s[m][i],m);          printf("Warning (#%d)! Date of death (month %2d and year %4d) of individual %ld on line %d was unknown but status is a death state %d at wave %d. If you don't know the vital status, please enter -2. If he/she is still alive but don't know the state, please code with '-1 or '.'. Here, we believe in a death.\nOther similar cases in log file\n", *nbwarn,(int)moisdc[i],(int)andc[i],num[i],i,s[m][i],m);
         }          }
         fprintf(ficlog,"Error! Date of death (month %2d and year %4d) of individual %ld on line %d was unknown, you must set an arbitrary year of death or he/she is skipped and results can be biased (%d) because status is a death state %d at wave %d. Wave dropped.\n",(int)moisdc[i],(int)andc[i],num[i],i, *nberr,s[m][i],m);          fprintf(ficlog,"Warning (#%d)! Date of death (month %2d and year %4d) of individual %ld on line %d was unknown but status is a death state %d at wave %d. If you don't know the vital status, please enter -2. If he/she is still alive but don't know the state, please code with '-1 or '.'. Here, we believe in a death.\nOther similar cases in log file\n", *nbwarn,(int)moisdc[i],(int)andc[i],num[i],i,s[m][i],m);
         s[m][i]=-1;          /* s[m][i]=-1; */ /* Keeping the death status */
       }        }
       if((int)moisdc[i]==99 && (int)andc[i]!=9999 && s[m][i]>nlstate){        if((int)moisdc[i]==99 && (int)andc[i]!=9999 && s[m][i]>nlstate){
         (*nberr)++;          (*nberr)++;
         printf("Error! Month of death of individual %ld on line %d was unknown %2d, you should set it otherwise the information on the death is skipped and results are biased.\n",num[i],i,(int)moisdc[i]);           printf("Error (#%d)! Month of death of individual %ld on line %d was unknown (%2d) (year of death is %4d) and status is a death state %d at wave %d. Please impute an arbitrary (or not) month and rerun. Currently this transition to death will be skipped (status is set to -2).\nOther similar cases in log file\n", *nberr, num[i],i,(int)moisdc[i],(int)andc[i],s[m][i],m);
         fprintf(ficlog,"Error! Month of death of individual %ld on line %d was unknown %f, you should set it otherwise the information on the death is skipped and results are biased.\n",num[i],i,moisdc[i]);           fprintf(ficlog,"Error (#%d)! Month of death of individual %ld on line %d was unknown (%2d) (year of death is %4d) and status is a death state %d at wave %d. Please impute an arbitrary (or not) month and rerun. Currently this transition to death will be skipped (status is set to -2).\nOther similar cases in log file\n", *nberr, num[i],i,(int)moisdc[i],(int)andc[i],s[m][i],m);
         s[m][i]=-1; /* We prefer to skip it (and to skip it in version 0.8a1 too */          s[m][i]=-2; /* We prefer to skip it (and to skip it in version 0.8a1 too */
       }        }
     }      }
   }    }
Line 9778  int main(int argc, char *argv[]) Line 9786  int main(int argc, char *argv[])
   int NDIM=2;    int NDIM=2;
   int vpopbased=0;    int vpopbased=0;
   int nres=0;    int nres=0;
     int endishere=0;
   
   char ca[32], cb[32];    char ca[32], cb[32];
   /*  FILE *fichtm; *//* Html File */    /*  FILE *fichtm; *//* Html File */
Line 11152  Please run with mle=-1 to get a correct Line 11161  Please run with mle=-1 to get a correct
         fprintf(ficlog,"Error: Not 7 (data)parameters in line but %d, for example:begin-prev-date=1/1/1990 end-prev-date=1/6/2004  mov_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);          fprintf(ficlog,"Error: Not 7 (data)parameters in line but %d, for example:begin-prev-date=1/1/1990 end-prev-date=1/6/2004  mov_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);
         goto end;          goto end;
       }        }
     /* fscanf(ficpar,"begin-prev-date=%lf/%lf/%lf end-prev-date=%lf/%lf/%lf mov_average=%d\n",&jprev1, &mprev1,&anprev1,&jprev2, &mprev2,&anprev2,&mobilav); */  
       printf("begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);        printf("begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);
       fprintf(ficparo,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);        fprintf(ficparo,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);
       fprintf(ficres,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);        fprintf(ficres,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);
       printf("begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);  
       fprintf(ficlog,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);        fprintf(ficlog,"begin-prev-date=%.lf/%.lf/%.lf end-prev-date=%.lf/%.lf/%.lf mov_average=%d\n",jprev1, mprev1,anprev1,jprev2, mprev2,anprev2,mobilav);
     }      }
   
Line 11188  Please run with mle=-1 to get a correct Line 11195  Please run with mle=-1 to get a correct
       fprintf(ficres,"pop_based=%d\n",popbased);           fprintf(ficres,"pop_based=%d\n",popbased);   
     }      }
             
     while(fgets(line, MAXLINE, ficpar)) {  
       /* If line starts with a # it is a comment */  
       if (line[0] == '#') {  
         numlinepar++;  
         fputs(line,stdout);  
         fputs(line,ficparo);  
         fputs(line,ficlog);  
         continue;  
       }else  
         break;  
     }  
    /* while((c=getc(ficpar))=='#' && c!= EOF){ */  
    /*    ungetc(c,ficpar); */  
    /*    fgets(line, MAXLINE, ficpar); */  
    /*    fputs(line,stdout); */  
    /*    fputs(line,ficres); */  
    /*    fputs(line,ficparo); */  
    /*  } */  
    /*  ungetc(c,ficpar); */  
       
     /* fscanf(ficpar,"prevforecast=%d starting-proj-date=%lf/%lf/%lf final-proj-date=%lf/%lf/%lf mobil_average=%d\n",&prevfcast,&jproj1,&mproj1,&anproj1,&jproj2,&mproj2,&anproj2,&mobilavproj); */  
     if((num_filled=sscanf(line,"prevforecast=%d starting-proj-date=%lf/%lf/%lf final-proj-date=%lf/%lf/%lf mobil_average=%d\n",&prevfcast,&jproj1,&mproj1,&anproj1,&jproj2,&mproj2,&anproj2,&mobilavproj)) !=EOF){  
       if (num_filled != 8) {  
         printf("Error: Not 8 (data)parameters in line but %d, for example:prevforecast=1 starting-proj-date=1/1/1990 final-proj-date=1/1/2000 mobil_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);  
         fprintf(ficlog,"Error: Not 8 (data)parameters in line but %d, for example:prevforecast=1 starting-proj-date=1/1/1990 final-proj-date=1/1/2000 mov_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);  
         goto end;  
       }  
      fprintf(ficparo,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);  
      printf("prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);  
      fprintf(ficlog,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);  
      fprintf(ficres,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);  
     /* day and month of proj2 are not used but only year anproj2.*/  
     }  
      while(fgets(line, MAXLINE, ficpar)) {  
       /* If line starts with a # it is a comment */  
       if (line[0] == '#') {  
         numlinepar++;  
         fputs(line,stdout);  
         fputs(line,ficparo);  
         fputs(line,ficlog);  
         continue;  
       }else  
         break;  
     }  
     /* while((c=getc(ficpar))=='#' && c!= EOF){ */  
     /*   ungetc(c,ficpar); */  
     /*   fgets(line, MAXLINE, ficpar); */  
     /*   fputs(line,stdout); */  
     /*   fputs(line,ficparo); */  
     /*   fputs(line,ficres); */  
     /* } */  
     /* ungetc(c,ficpar); */  
       
     fscanf(ficpar,"backcast=%d starting-back-date=%lf/%lf/%lf final-back-date=%lf/%lf/%lf mobil_average=%d\n",&backcast,&jback1,&mback1,&anback1,&jback2,&mback2,&anback2,&mobilavproj);  
     if((num_filled=sscanf(line,"backcast=%d starting-back-date=%lf/%lf/%lf final-back-date=%lf/%lf/%lf mobil_average=%d\n",&backcast,&jback1,&mback1,&anback1,&jback2,&mback2,&anback2,&mobilavproj)) !=EOF){  
       if (num_filled != 8) {  
         printf("Error: Not 8 (data)parameters in line but %d, for example:backcast=1 starting-back-date=1/1/1990 finloal-back-date=1/1/1970 mobil_average=1\n, your line=%s . Probably you are running an older format.\n",num_filled,line);  
         fprintf(ficlog,"Error: Not 8 (data)parameters in line but %d, for example:backcast=1 starting-back-date=1/1/1990 finloal-back-date=1/1/1970 mobil_average=1\n, your line=%s . Probably you are running an older format.\n",num_filled,line);  
         goto end;  
       }  
       printf("backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);  
       fprintf(ficparo,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);  
       fprintf(ficlog,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);  
       fprintf(ficres,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);  
     /* day and month of proj2 are not used but only year anproj2.*/  
     }  
     /* Results */      /* Results */
     nresult=0;      nresult=0;
     while(fgets(line, MAXLINE, ficpar)) {      do{
       /* If line starts with a # it is a comment */        if(!fgets(line, MAXLINE, ficpar)){
       if (line[0] == '#') {          endishere=1;
           parameterline=14;
         }else if (line[0] == '#') {
           /* If line starts with a # it is a comment */
         numlinepar++;          numlinepar++;
         fputs(line,stdout);          fputs(line,stdout);
         fputs(line,ficparo);          fputs(line,ficparo);
         fputs(line,ficlog);          fputs(line,ficlog);
         fputs(line,ficres);  
         continue;          continue;
       }else        }else if(sscanf(line,"prevforecast=%[^\n]\n",modeltemp))
         break;          parameterline=11;
     }        else if(sscanf(line,"backcast=%[^\n]\n",modeltemp))
     if (!feof(ficpar))          parameterline=12;
     while((num_filled=sscanf(line,"result:%[^\n]\n",resultline)) !=EOF){        else if(sscanf(line,"result:%[^\n]\n",modeltemp))
       if (num_filled == 0){          parameterline=13;
         resultline[0]='\0';        else{
         printf("Warning %d: no result line should be at minimum 'result: V2=0 V1=1 or result:.\n%s\n", num_filled, line);          parameterline=14;
       break;  
       } else if (num_filled != 1){  
         printf("ERROR %d: result line should be at minimum 'result: V2=0 V1=1 or result:.' %s\n",num_filled, line);  
       }  
       nresult++; /* Sum of resultlines */  
       printf("Result %d: result=%s\n",nresult, resultline);  
       if(nresult > MAXRESULTLINES){  
         printf("ERROR: Current version of IMaCh limits the number of resultlines to %d, you used %d\n",MAXRESULTLINES,nresult);  
         fprintf(ficlog,"ERROR: Current version of IMaCh limits the number of resultlines to %d, you used %d\n",MAXRESULTLINES,nresult);  
         goto end;  
       }  
       decoderesult(resultline, nresult); /* Fills TKresult[nresult] combination and Tresult[nresult][k4+1] combination values */  
       fprintf(ficparo,"result: %s\n",resultline);  
       fprintf(ficres,"result: %s\n",resultline);  
       fprintf(ficlog,"result: %s\n",resultline);  
       while(fgets(line, MAXLINE, ficpar)) {  
         /* If line starts with a # it is a comment */  
         if (line[0] == '#') {  
           numlinepar++;  
           fputs(line,stdout);  
           fputs(line,ficparo);  
           fputs(line,ficres);  
           fputs(line,ficlog);  
           continue;  
         }else  
           break;  
       }        }
       if (feof(ficpar))        switch (parameterline){ 
         case 11:
           if((num_filled=sscanf(line,"prevforecast=%d starting-proj-date=%lf/%lf/%lf final-proj-date=%lf/%lf/%lf mobil_average=%d\n",&prevfcast,&jproj1,&mproj1,&anproj1,&jproj2,&mproj2,&anproj2,&mobilavproj)) !=EOF){
             if (num_filled != 8) {
               printf("Error: Not 8 (data)parameters in line but %d, for example:prevforecast=1 starting-proj-date=1/1/1990 final-proj-date=1/1/2000 mobil_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);
               fprintf(ficlog,"Error: Not 8 (data)parameters in line but %d, for example:prevforecast=1 starting-proj-date=1/1/1990 final-proj-date=1/1/2000 mov_average=0\n, your line=%s . Probably you are running an older format.\n",num_filled,line);
               goto end;
             }
             fprintf(ficparo,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);
             printf("prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);
             fprintf(ficlog,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);
             fprintf(ficres,"prevforecast=%d starting-proj-date=%.lf/%.lf/%.lf final-proj-date=%.lf/%.lf/%.lf mobil_average=%d\n",prevfcast,jproj1,mproj1,anproj1,jproj2,mproj2,anproj2,mobilavproj);
             /* day and month of proj2 are not used but only year anproj2.*/
           }
         break;          break;
       else{ /* Processess output results for this combination of covariate values */        case 12:
       }                                      /*fscanf(ficpar,"backcast=%d starting-back-date=%lf/%lf/%lf final-back-date=%lf/%lf/%lf mobil_average=%d\n",&backcast,&jback1,&mback1,&anback1,&jback2,&mback2,&anback2,&mobilavproj);*/
     } /* end while */          if((num_filled=sscanf(line,"backcast=%d starting-back-date=%lf/%lf/%lf final-back-date=%lf/%lf/%lf mobil_average=%d\n",&backcast,&jback1,&mback1,&anback1,&jback2,&mback2,&anback2,&mobilavproj)) !=EOF){
             if (num_filled != 8) {
               printf("Error: Not 8 (data)parameters in line but %d, for example:backcast=1 starting-back-date=1/1/1990 finloal-back-date=1/1/1970 mobil_average=1\n, your line=%s . Probably you are running an older format.\n",num_filled,line);
               fprintf(ficlog,"Error: Not 8 (data)parameters in line but %d, for example:backcast=1 starting-back-date=1/1/1990 finloal-back-date=1/1/1970 mobil_average=1\n, your line=%s . Probably you are running an older format.\n",num_filled,line);
               goto end;
             }
             printf("backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);
             fprintf(ficparo,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);
             fprintf(ficlog,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);
             fprintf(ficres,"backcast=%d starting-back-date=%.lf/%.lf/%.lf final-back-date=%.lf/%.lf/%.lf mobil_average=%d\n",backcast,jback1,mback1,anback1,jback2,mback2,anback2,mobilavproj);
             /* day and month of proj2 are not used but only year anproj2.*/
           }
           break;
         case 13:
           if((num_filled=sscanf(line,"result:%[^\n]\n",resultline)) !=EOF){
             if (num_filled == 0){
               resultline[0]='\0';
               printf("Warning %d: no result line! It should be at minimum 'result: V2=0 V1=1 or result:.\n%s\n", num_filled, line);
               fprintf(ficlog,"Warning %d: no result line! It should be at minimum 'result: V2=0 V1=1 or result:.\n%s\n", num_filled, line);
               break;
             } else if (num_filled != 1){
               printf("ERROR %d: result line! It should be at minimum 'result: V2=0 V1=1 or result:.' %s\n",num_filled, line);
               fprintf(ficlog,"ERROR %d: result line! It should be at minimum 'result: V2=0 V1=1 or result:.' %s\n",num_filled, line);
             }
             nresult++; /* Sum of resultlines */
             printf("Result %d: result=%s\n",nresult, resultline);
             if(nresult > MAXRESULTLINES){
               printf("ERROR: Current version of IMaCh limits the number of resultlines to %d, you used %d\n",MAXRESULTLINES,nresult);
               fprintf(ficlog,"ERROR: Current version of IMaCh limits the number of resultlines to %d, you used %d\n",MAXRESULTLINES,nresult);
               goto end;
             }
             decoderesult(resultline, nresult); /* Fills TKresult[nresult] combination and Tresult[nresult][k4+1] combination values */
             fprintf(ficparo,"result: %s\n",resultline);
             fprintf(ficres,"result: %s\n",resultline);
             fprintf(ficlog,"result: %s\n",resultline);
             break;
           case 14: 
             if(ncovmodel >2 && nresult==0 ){
               printf("ERROR: no result lines! It should be at minimum 'result: V2=0 V1=1 or result:.' %s\n",line);
               goto end;
             }
             break;
           default:
             nresult=1;
             decoderesult(".",nresult ); /* No covariate */
           }
         } /* End switch parameterline */
       }while(endishere==0); /* End do */
           
     /* freqsummary(fileres, agemin, agemax, s, agev, nlstate, imx,Tvaraff,nbcode, ncodemax,mint,anint); */      /* freqsummary(fileres, agemin, agemax, s, agev, nlstate, imx,Tvaraff,nbcode, ncodemax,mint,anint); */
     /* ,dateprev1,dateprev2,jprev1, mprev1,anprev1,jprev2, mprev2,anprev2); */      /* ,dateprev1,dateprev2,jprev1, mprev1,anprev1,jprev2, mprev2,anprev2); */
Line 11323  Please run with mle=-1 to get a correct Line 11298  Please run with mle=-1 to get a correct
       printinggnuplot(fileresu, optionfilefiname,ageminpar,agemaxpar,fage, prevfcast, backcast, pathc,p);        printinggnuplot(fileresu, optionfilefiname,ageminpar,agemaxpar,fage, prevfcast, backcast, pathc,p);
     }      }
     printinghtml(fileresu,title,datafile, firstpass, lastpass, stepm, weightopt, \      printinghtml(fileresu,title,datafile, firstpass, lastpass, stepm, weightopt, \
                  model,imx,jmin,jmax,jmean,rfileres,popforecast,prevfcast,backcast, estepm, \                   model,imx,jmin,jmax,jmean,rfileres,popforecast,mobilav,prevfcast,mobilavproj,backcast, estepm, \
                  jprev1,mprev1,anprev1,dateprev1,jprev2,mprev2,anprev2,dateprev2);                   jprev1,mprev1,anprev1,dateprev1,jprev2,mprev2,anprev2,dateprev2);
                                   
     /*------------ free_vector  -------------*/      /*------------ free_vector  -------------*/
Line 11376  Please run with mle=-1 to get a correct Line 11351  Please run with mle=-1 to get a correct
       mobaverage=mobaverages;        mobaverage=mobaverages;
       if (mobilav!=0) {        if (mobilav!=0) {
         printf("Movingaveraging observed prevalence\n");          printf("Movingaveraging observed prevalence\n");
           fprintf(ficlog,"Movingaveraging observed prevalence\n");
         if (movingaverage(probs, ageminpar, agemaxpar, mobaverage, mobilav)!=0){          if (movingaverage(probs, ageminpar, agemaxpar, mobaverage, mobilav)!=0){
           fprintf(ficlog," Error in movingaverage mobilav=%d\n",mobilav);            fprintf(ficlog," Error in movingaverage mobilav=%d\n",mobilav);
           printf(" Error in movingaverage mobilav=%d\n",mobilav);            printf(" Error in movingaverage mobilav=%d\n",mobilav);
Line 11385  Please run with mle=-1 to get a correct Line 11361  Please run with mle=-1 to get a correct
       /* prevalence(probs, ageminpar, agemaxpar, s, agev, nlstate, imx, Tvar, nbcode, ncodemax, mint, anint, dateprev1, dateprev2, firstpass, lastpass); */        /* prevalence(probs, ageminpar, agemaxpar, s, agev, nlstate, imx, Tvar, nbcode, ncodemax, mint, anint, dateprev1, dateprev2, firstpass, lastpass); */
       else if (mobilavproj !=0) {        else if (mobilavproj !=0) {
         printf("Movingaveraging projected observed prevalence\n");          printf("Movingaveraging projected observed prevalence\n");
           fprintf(ficlog,"Movingaveraging projected observed prevalence\n");
         if (movingaverage(probs, ageminpar, agemaxpar, mobaverage, mobilavproj)!=0){          if (movingaverage(probs, ageminpar, agemaxpar, mobaverage, mobilavproj)!=0){
           fprintf(ficlog," Error in movingaverage mobilavproj=%d\n",mobilavproj);            fprintf(ficlog," Error in movingaverage mobilavproj=%d\n",mobilavproj);
           printf(" Error in movingaverage mobilavproj=%d\n",mobilavproj);            printf(" Error in movingaverage mobilavproj=%d\n",mobilavproj);
Removed from v.1.256  
changed lines
  Added in v.1.259

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>